Bole EKH UPVC Series
Technical Data
BL200EKH/C700/UPVC
BL250EKH/C980/UPVC
BL300EKH/C1600/UPVC
BL400EKH/C3100/UPVC
BL530EKH/C4000/UPVC
BL600EKH/C4700/UPVC
BL700EKH/C5800/UPVC
BL800EKH/C8600/UPVC
BL900EKH/C8600/UPVC
BL1000EKH/C10500/UPVC
BL1200EKH/C10500/UPVC
BL1400EKH/C13000/UPVC
BL1600EKH/C16000/UPVC
BL200EKH/C700/UPVC
| DESCRIPTION | UNIT | BL200EKH/C700/UPVC |
|---|---|---|
| International specification | 700 | |
| Screw diameter | Screw specification | customized for PVC |
| mm | 45 | |
| Screw ratio | 20 | |
| Theoretical injectionncapacity | cm‘ | 382 |
| Shot weight (UPVC) | g | 458 |
| OZ | 16.2 | |
| Injection rate into Air | cm’/s | 197 |
| g/S | 236 | |
| Injection pressure | MPa | 185 |
| Theoretical plasticization rate | g/S (UPVC) | 17 |
| Injection stroke | mm | 240 |
| Max. in jection speed | mm/s | 124 |
| Screw speed | r/min | 130 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 16. 4~23 |
| Number of Motors | PC | 1 |
| Heater power | kW | 12.2 |
| Number of temp. control zones | 3+1 | |
| Clamping force | kN | 2000 |
| Opening stroke | mm | 480 |
| Space between tie bar | mm x mm | 505×455 |
| Min. mould height | mm | 200(165) |
| Max. mould height | mm | 530(530) |
| Max. distance Platen | mm | 1010(101 0) |
| Ejector stroke | mm | 150 |
| Ejector force forward | kN | 49 |
| Ejector force back | kN | 37 |
| Number of ejector bar | PC | 5 |
| Cycle time | S | 2.5 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 25 |
| Oil tank capacity | L | 230 |
| Machine dimensions (L X W X H) | mxmxm | 5.2×1.4×2.2 |
| Machine weight | Ton | 5.5 |
| Widen safety gate Optionally (single side) | mm | 100 |
| Machine dimensions (LXWX H) | m x m x m | 5.2×1.6×2.2 |
BL250EKH/C980/UPVC
| DESCRIPTION | UNIT | BL250EKH/C980/UPVC |
|---|---|---|
| International specification | 980 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 50 | |
| Screw ratio | 20.0 | |
| Theoretical injectionncapacity | cm‘ | 530 |
| Shot weight (UPVC) | g | 636 |
| OZ | 22.5 | |
| Injection rate into Air | cm’/s | 247 |
| g/S | 296 | |
| Injection pressure | MPa | 186 |
| Theoretical plasticization rate | g/S (UPVC) | 25 |
| Injection stroke | mm | 270 |
| Max. in jection speed | mm/s | 126 |
| Screw speed | r/min | 130 |
| Sys. Pressure | MPa | 17. 5 |
| Pump Motor ( M in ~ M ax) | kW | 20.5~27.8 |
| Number of Motors | PC | 1 |
| Heater power | kW | 13.72 |
| Number of temp. control zones | 4+1 | |
| Clamping force | kN | 2500 |
| Opening stroke | mm | 530 |
| Space between tie bar | mm x mm | 555×505 |
| Min. mould height | mm | 220(175) |
| Max. mould height | mm | 570(570) |
| Max. distance Platen | mm | 1100( 1100) |
| Ejector stroke | mm | 150 |
| Ejector force forward | kN | 67 |
| Ejector force back | kN | 39 |
| Number of ejector bar | PC | 9 |
| Cycle time | S | 3. 3 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 50 |
| Oil tank capacity | L | 280 |
| Machine dimensions (L X W X H) | mxmxm | 5.7×1.5×2.4 |
| Machine weight | Ton | 7 |
| Widen safety gate Optionally (single side) | mm | 100 |
| Machine dimensions (LXWX H) | m x m x m | 5.7×1.7×2.4 |
BL300EKH/C1600/UPVC
| DESCRIPTION | UNIT | BL300EKH/C1600/UPVC |
|---|---|---|
| International specification | 1600 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 80 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 890 |
| Shot weight (UPVC) | g | 1068 |
| OZ | 37.7 | |
| Injection rate into Air | cm’/s | 317 |
| g/S | 381 | |
| Injection pressure | MPa | 184 |
| Theoretical plasticization rate | g/S (UPVC) | 43 |
| Injection stroke | mm | 315 |
| Max. in jection speed | mm/s | 112 |
| Screw speed | r/min | 130 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 26.7~36.5 |
| Number of Motors | PC | 1 |
| Heater power | kW | 19.55 |
| Number of temp. control zones | 4+1 | |
| Clamping force | kN | 3000 |
| Opening stroke | mm | 590 |
| Space between tie bar | mm x mm | 655×605 |
| Min. mould height | mm | 250(205) |
| Max. mould height | mm | 660(660) |
| Max. distance Platen | mm | 1250( 1250) |
| Ejector stroke | mm | 190 |
| Ejector force forward | kN | 67 |
| Ejector force back | kN | 39 |
| Number of ejector bar | PC | 13 |
| Cycle time | S | 2. 8 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 50 |
| Oil tank capacity | L | 350 |
| Machine dimensions (L X W X H) | mxmxm | 6.2×1.7×2.5 |
| Machine weight | Ton | 9 |
| Widen safety gate Optionally (single side) | mm | 150 |
| Machine dimensions (LXWX H) | m x m x m | 6.2x3x2.5 |
BL400EKH/C3100/UPVC
| DESCRIPTION | UNIT | BL450EKH/C3100/UPVC |
|---|---|---|
| International specification | 3100 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 75 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 1678 |
| Shot weight (UPVC) | g | 2014 |
| OZ | 71.1 | |
| Injection rate into Air | cm’/s | 493 |
| g/S | 592 | |
| Injection pressure | MPa | 185 |
| Theoretical plasticization rate | g/S (UPVC) | 60 |
| Injection stroke | mm | 380 |
| Max. in jection speed | mm/s | 112 |
| Screw speed | r/min | 100 |
| Sys. Pressure | MPa | 17. 5 |
| Pump Motor ( M in ~ M ax) | kW | 50.7~52.7 |
| Number of Motors | PC | 1 |
| Heater power | kW | 27.35 |
| Number of temp. control zones | 4+1 | |
| Clamping force | kN | 4500 |
| Opening stroke | mm | 750 |
| Space between tie bar | mm x mm | 760×710 |
| Min. mould height | mm | 330 |
| Max. mould height | mm | 780 |
| Max. distance Platen | mm | 1530 |
| Ejector stroke | mm | 210 |
| Ejector force forward | kN | 123 |
| Ejector force back | kN | 82 |
| Number of ejector bar | PC | 13 |
| Cycle time | S | 3.7 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | S0 |
| Oil tank capacity | L | 420 |
| Machine dimensions (L X W X H) | mxmxm | 7.7×1.9×2.6 |
| Machine weight | Ton | 14.5 |
| Widen safety gate Optionally (single side) | mm | 200 |
| Machine dimensions (LXWX H) | m x m x m | 7.7×2.3×2.6 |
BL530EKH/C4000/UPVC
| DESCRIPTION | UNIT | BL530EKH/C4000/UPVC |
|---|---|---|
| International specification | 4000 | |
| Screw diameter | Screw specification | customized for PVC |
| mm | 80 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 2211 |
| Shot weight (UPVC) | g | 2653 |
| OZ | 93.7 | |
| Injection rate into Air | cm’/s | 595 |
| g/S | 714 | |
| Injection pressure | MPa | 184 |
| Theoretical plasticization rate | g/S (UPVC) | 80 |
| Injection stroke | mm | 440 |
| Max. in jection speed | mm/s | 118 |
| Screw speed | r/min | 100 |
| Sys. Pressure | MPa | 17. 5 |
| Pump Motor ( M in ~ M ax) | kW | 57.3~62.7 |
| Number of Motors | PC | 2 |
| Heater power | kW | 32 |
| Number of temp. control zones | 4+1 | |
| Clamping force | kN | 5300 |
| Opening stroke | mm | 850 |
| Space between tie bar | mm x mm | 860×800 |
| Min. mould height | mm | 330 |
| Max. mould height | mm | 850 |
| Max. distance Platen | mm | 1700 |
| Ejector stroke | mm | 210 |
| Ejector force forward | kN | 123 |
| Ejector force back | kN | 82 |
| Number of ejector bar | PC | 13 |
| Cycle time | S | 4.3 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 100 |
| Oil tank capacity | L | 600 |
| Machine dimensions (L X W X H) | mxmxm | 8.3×2.1×2.9 |
| Machine weight | Ton | 19.5 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 8.3×3.6×2.9 |
BL600EKH/C4700/UPVC
| DESCRIPTION | UNIT | BL600EKH/C4700/UPVC |
|---|---|---|
| International specification | 4700 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 90 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 2893 |
| Shot weight (UPVC) | g | 3472 |
| OZ | 122.7 | |
| Injection rate into Air | cm’/s | 783 |
| g/S | 940 | |
| Injection pressure | MPa | 163 |
| Theoretical plasticization rate | g/S (UPVC) | 81 |
| Injection stroke | mm | 455 |
| Max. in jection speed | mm/s | 123 |
| Screw speed | r/min | 100 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 67.1~75.7 |
| Number of Motors | PC | 2 |
| Heater power | kW | 36.1 |
| Number of temp. control zones | 5+1 | |
| Clamping force | kN | 6000 |
| Opening stroke | mm | 900 |
| Space between tie bar | mm x mm | 910×855 |
| Min. mould height | mm | 380 |
| Max. mould height | mm | 910 |
| Max. distance Platen | mm | 1810 |
| Ejector stroke | mm | 220 |
| Ejector force forward | kN | 123 |
| Ejector force back | kN | 82 |
| Number of ejector bar | PC | 21 |
| Cycle time | S | 4.4 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 100 |
| Oil tank capacity | L | 750 |
| Machine dimensions (L X W X H) | mxmxm | 9.1×2.2×2.9 |
| Machine weight | Ton | 22 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 9.1×2.7×2.9 |
BL700EKH/C5800/UPVC
| DESCRIPTION | UNIT | BL700EKH/C5800/UPVC |
|---|---|---|
| International specification | 5800 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 95 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 3542 |
| Shot weight (UPVC) | g | 4251 |
| OZ | 150.2 | |
| Injection rate into Air | cm’/s | 884 |
| g/S | 1061 | |
| Injection pressure | MPa | 165 |
| Theoretical plasticization rate | g/S (UPVC) | 91 |
| Injection stroke | mm | 500 |
| Max. in jection speed | mm/s | 125 |
| Screw speed | r/min | 100 |
| Sys. Pressure | MPa | 17. 5 |
| Pump Motor ( M in ~ M ax) | kW | 79.4~81.8 |
| Number of Motors | PC | 2 |
| Heater power | kW | 43 |
| Number of temp. control zones | 5+1 | |
| Clamping force | kN | 7000 |
| Opening stroke | mm | 970 |
| Space between tie bar | mm x mm | 955×855 |
| Min. mould height | mm | 400 |
| Max. mould height | mm | 960 |
| Max. distance Platen | mm | 1930 |
| Ejector stroke | mm | 260 |
| Ejector force forward | kN | 166 |
| Ejector force back | kN | 117 |
| Number of ejector bar | PC | 21 |
| Cycle time | S | 3.8 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 100 |
| Oil tank capacity | L | 900 |
| Machine dimensions (L X W X H) | mxmxm | 9.6x23x3 |
| Machine weight | Ton | 25 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 9.6×2.8×3 |
BL800EKH/C8600/UPVC
| DESCRIPTION | UNIT | BL800EKH/C8600/UPVC |
|---|---|---|
| International specification | 8600 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 105 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 4717 |
| Shot weight (UPVC) | g | 5660 |
| OZ | 200.0 | |
| Injection rate into Air | cm’/s | 897 |
| g/S | 1077 | |
| Injection pressure | MPa | 183 |
| Theoretical plasticization rate | g/S (UPVC) | 116 |
| Injection stroke | mm | 545 |
| Max. in jection speed | mm/s | 104 |
| Screw speed | r/min | 100 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 91.6~92.4 |
| Number of Motors | PC | 2 |
| Heater power | kW | 50.1 |
| Number of temp. control zones | 5+1 | |
| Clamping force | kN | 8000 |
| Opening stroke | mm | 1050 |
| Space between tie bar | mm x mm | 1055×955 |
| Min. mould height | mm | 450 |
| Max. mould height | mm | 1000 |
| Max. distance Platen | mm | 2050 |
| Ejector stroke | mm | 270 |
| Ejector force forward | kN | 166 |
| Ejector force back | kN | 117 |
| Number of ejector bar | PC | 21 |
| Cycle time | S | 4.5 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 100 |
| Oil tank capacity | L | 1070 |
| Machine dimensions (L X W X H) | mxmxm | 10.4×2.5×3.1 |
| Machine weight | Ton | 30 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 10.4x3x3.1 |
BL900EKH/C8600/UPVC
| DESCRIPTION | UNIT | BL900EKH/C8600/UPVC |
|---|---|---|
| International specification | 8600 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 110 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 5177 |
| Shot weight (UPVC) | g | 6212 |
| OZ | 219.5 | |
| Injection rate into Air | cm’/s | 985 |
| g/S | 1182 | |
| Injection pressure | MPa | 167 |
| Theoretical plasticization rate | g/S (UPVC) | 116 |
| Injection stroke | mm | 545 |
| Max. in jection speed | mm/s | 104 |
| Screw speed | r/min | 100 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 91.6~92.4 |
| Number of Motors | PC | 2 |
| Heater power | kW | 53 |
| Number of temp. control zones | 5+1 | |
| Clamping force | kN | 9000 |
| Opening stroke | mm | 1120 |
| Space between tie bar | mm x mm | 1110×1010 |
| Min. mould height | mm | 450 |
| Max. mould height | mm | 1100 |
| Max. distance Platen | mm | 2220 |
| Ejector stroke | mm | 300 |
| Ejector force forward | kN | 232 |
| Ejector force back | kN | 132 |
| Number of ejector bar | PC | 21 |
| Cycle time | S | 5.6 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 100 |
| Oil tank capacity | L | 1070 |
| Machine dimensions (L X W X H) | mxmxm | 10.8×2.6×3.1 |
| Machine weight | Ton | 38 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 10.8×3.1×3.1 |
BL1000EKH/C10500/UPVC
| DESCRIPTION | UNIT | BL1000EKH/C10500/UPVC |
|---|---|---|
| International specification | 10500 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 120 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 6726 |
| Shot weight (UPVC) | g | 8071 |
| OZ | 285.2 | |
| Injection rate into Air | cm’/s | 1172 |
| g/S | 1406 | |
| Injection pressure | MPa | 156 |
| Theoretical plasticization rate | g/S (UPVC) | 140 |
| Injection stroke | mm | 595 |
| Max. in jection speed | mm/s | 104 |
| Screw speed | r/min | 70 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 101.4~105.4 |
| Number of Motors | PC | 2 |
| Heater power | kW | 56.2 |
| Number of temp. control zones | 6+1 | |
| Clamping force | kN | 10000 |
| Opening stroke | mm | 1150 |
| Space between tie bar | mm x mm | 1160×1060 |
| Min. mould height | mm | 480 |
| Max. mould height | mm | 1160 |
| Max. distance Platen | mm | 2310 |
| Ejector stroke | mm | 300 |
| Ejector force forward | kN | 248 |
| Ejector force back | kN | 165 |
| Number of ejector bar | PC | 21 |
| Cycle time | S | 7 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 100 |
| Oil tank capacity | L | 1350 |
| Machine dimensions (L X W X H) | mxmxm | 1 0.9X2.9×4.2 |
| Machine weight | Ton | 45 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 10.9×3.4×4.2 |
BL1200EKH/C10500/UPVC
| DESCRIPTION | UNIT | BL1200EKH/C10500/UPVC |
|---|---|---|
| International specification | 10500 | |
| Screw diameter | Screw specification | customized for PVC |
| mm | 120 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 6726 |
| Shot weight (UPVC) | g | 8071 |
| OZ | 285.2 | |
| Injection rate into Air | cm’/s | 1172 |
| g/S | 1406 | |
| Injection pressure | MPa | 156 |
| Theoretical plasticization rate | g/S (UPVC) | 140 |
| Injection stroke | mm | 595 |
| Max. in jection speed | mm/s | 104 |
| Screw speed | r/min | 70 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 101.4~105.4 |
| Number of Motors | PC | 2 |
| Heater power | kW | 56.2 |
| Number of temp. control zones | 6+1 | |
| Clamping force | kN | 12000 |
| Opening stroke | mm | 1320 |
| Space between tie bar | mm x mm | 1260×1120 |
| Min. mould height | mm | 500 |
| Max. mould height | mm | 1200 |
| Max. distance Platen | mm | 2520 |
| Ejector stroke | mm | 350 |
| Ejector force forward | kN | 248 |
| Ejector force back | kN | 165 |
| Number of ejector bar | PC | 21 |
| Cycle time | S | 8 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 200 |
| Oil tank capacity | L | 1350 |
| Machine dimensions (L X W X H) | mxmxm | 4x3x4.2 |
| Machine weight | Ton | 52 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 11.4×3.5×4.2 |
BL1400EKH/C13000/UPVC
| DESCRIPTION | UNIT | BL1400EKH/C13000/UPVC |
|---|---|---|
| International specification | 13000 | |
| Screw diameter | Screw specification | customized for PVC |
| mm | 130 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 8491 |
| Shot weight (UPVC) | g | 10189 |
| OZ | 360 | |
| Injection rate into Air | cm’/s | 1420 |
| g/S | 1704 | |
| Injection pressure | MPa | 154 |
| Theoretical plasticization rate | g/S (UPVC) | 144 |
| Injection stroke | mm | 640 |
| Max. in jection speed | mm/s | 107 |
| Screw speed | r/min | 65 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 119.1~122.7 |
| Number of Motors | PC | 3 |
| Heater power | kW | 74.6 |
| Number of temp. control zones | 6+1 | |
| Clamping force | kN | 14000 |
| Opening stroke | mm | 1450 |
| Space between tie bar | mm x mm | 1420×1220 |
| Min. mould height | mm | 580 |
| Max. mould height | mm | 1300 |
| Max. distance Platen | mm | 2750 |
| Ejector stroke | mm | 350 |
| Ejector force forward | kN | 248 |
| Ejector force back | kN | 165 |
| Number of ejector bar | PC | 29 |
| Cycle time | S | 8.5 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 200 |
| Oil tank capacity | L | 1650 |
| Machine dimensions (L X W X H) | mxmxm | 12.3×3.3×4.1 |
| Machine weight | Ton | 67 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 1 2.3×3.8×4.1 |
BL1600EKH/C16000/UPVC
| DESCRIPTION | UNIT | BL1600EKH/C16000/UPVC |
|---|---|---|
| International specification | 16000 | |
| Screw diameter | Screw specification | Customized for PVC |
| mm | 140 | |
| Screw ratio | cm‘ | 21.0 |
| Theoretical injectionncapacity | 10462 | |
| Shot weight (UPVC) | g | 12555 |
| OZ | 443.6 | |
| Injection rate into Air | cm’/s | 1647 |
| g/S | 1976 | |
| Injection pressure | MPa | 155 |
| Theoretical plasticization rate | g/S (UPVC) | 144 |
| Injection stroke | mm | 680 |
| Max. in jection speed | mm/s | 107 |
| Screw speed | r/min | 65 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 142.3~145.1 |
| Number of Motors | PC | 3 |
| Heater power | kW | 79.7 |
| Number of temp. control zones | 6+1 | |
| Clamping force | kN | 16000 |
| Opening stroke | mm | 1550 |
| Space between tie bar | mm x mm | 1520×1320 |
| Min. mould height | mm | 680 |
| Max. mould height | mm | 1450 |
| Max. distance Platen | mm | 3000 |
| Ejector stroke | mm | 400 |
| Ejector force forward | kN | 363 |
| Ejector force back | kN | 280 |
| Number of ejector bar | PC | 29 |
| Cycle time | S | 9 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 200 |
| Oil tank capacity | L | 1650 |
| Machine dimensions (L X W X H) | mxmxm | 13.4×3.4×4.3 |
| Machine weight | Ton | 90 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 13.4×3.9×4.3 |