
DUSTBIN SERIES
Technical Data
BL140EKH
BL280EKH
BL530EKH
BL700/1000-50L
BL900/1200-60L
BL1200/1600-120L
BL1650/2200-240L
BL1850/2400-240L
BL2200/2500-240L
BL2500/2800-660L
BL140EKH
Description | Unit | BL140EKH |
International Specification | C460 | |
Screw diameter | mm | 40 |
Screw ratio | cm3 | 20 |
Theoretical injection capacity | cm3 | 251 |
Shot weight(PS) | g | 231 |
oz | 8.2 | |
Injection rate into Air | cm^3/s | 131 |
Injection rate into Air | g/s | 120 |
Injection pressure | MPa | 186 |
Theoretical plasticizing speed | g/S (PS) | 20 |
Theoretical plasticizing speed | g/S (HDPE) | 16 |
Max. injection speed | mm/s | 105 |
Screw speed | r/min | 240 |
Injection stroke | mm | 200 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 13.4∼18.7 |
Number of Motors | PC | 1 |
Electric Pre-Plastic Motor Power | KW | * |
Heater Power | KW | 9 |
Number of temp. control zones | 3+2 | |
Clamping force | kN | 1400 |
Opening stroke | mm | 420 |
Space between tie bar | mmxmm | 455X405 |
Min. mould height | mm | 180 |
Max. mould height | mm | 500 |
Max. Daylight | mm | 920 |
Ejector stroke | mm | 145 |
Ejector force forward | kN | 49 |
Ejector force back | kN | 37 |
Number of ejector bar | PC | 5 |
Heat Capacity | kg | 25 |
Oil tank capacity | L | 165 |
Machine dimensions(LxWxH) | mxmxm | 4.9X1.4X2.1 |
Machine weight | Ton | 4 |
BL280EKH
Description | Unit | BL280EKH |
International Specification | C1500 | |
Screw diameter | mm | 65 |
Screw ratio | cm3 | 19.4 |
Theoretical injection capacity | cm3 | 962 |
Shot weight(PS) | g | 885 |
oz | 31.3 | |
Injection rate into Air | cm^3/s | 313 |
Injection rate into Air | g/s | 285 |
Injection pressure | MPa | 157 |
Theoretical plasticizing speed | g/S (PS) | 68 |
Theoretical plasticizing speed | g/S (HDPE) | 190 |
Max. injection speed | mm/s | 94 |
Screw speed | r/min | 210 |
Injection stroke | mm | 290 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 26.7∼36.5 |
Number of Motors | PC | 1 |
Electric Pre-Plastic Motor Power | KW | * |
Heater Power | KW | 20 |
Number of temp. control zones | 4+2 | |
Clamping force | kN | 2800 |
Opening stroke | mm | 590 |
Space between tie bar | mmxmm | 655X605 |
Min. mould height | mm | 250 |
Max. mould height | mm | 660 |
Max. Daylight | mm | 1250 |
Ejector stroke | mm | 190 |
Ejector force forward | kN | 67 |
Ejector force back | kN | 39 |
Number of ejector bar | PC | 13 |
Heat Capacity | kg | 50 |
Oil tank capacity | L | 350 |
Machine dimensions(LxWxH) | mxmxm | 6.2X1.7X2.5 |
Machine weight | Ton | 9 |
BL530EKH
Description | Unit | BL530EKH |
International Specification | C4000 | |
Screw diameter | mm | 85 |
Screw ratio | cm3 | 23 |
Theoretical injection capacity | cm3 | 2496 |
Shot weight(PS) | g | 2296 |
oz | 81.1 | |
Injection rate into Air | cm^3/s | 771 |
Injection rate into Air | g/s | 702 |
Injection pressure | MPa | 163 |
Theoretical plasticizing speed | g/S (PS) | 95 |
Theoretical plasticizing speed | g/S (HDPE) | 190 |
Max. injection speed | mm/s | 136 |
Screw speed | r/min | 158 |
Injection stroke | mm | 440 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 77.4∼89.2 |
Number of Motors | PC | 2 |
Electric Pre-Plastic Motor Power | KW | * |
Heater Power | KW | 33 |
Number of temp. control zones | 4+2 | |
Clamping force | kN | 5300 |
Opening stroke | mm | 850 |
Space between tie bar | mmxmm | 860×800 |
Min. mould height | mm | 330 |
Max. mould height | mm | 850 |
Max. Daylight | mm | 1700 |
Ejector stroke | mm | 210 |
Ejector force forward | kN | 123 |
Ejector force back | kN | 82 |
Number of ejector bar | PC | 13 |
Heat Capacity | kg | 100 |
Oil tank capacity | L | 600 |
Machine dimensions(LxWxH) | mxmxm | 8.5×2.1×2.9 |
Machine weight | Ton | 19.5 |
BL700/1000-50L
Description | Unit | BL700/1000-50L |
International Specification | C5800 | |
Screw diameter | mm | 95 |
Screw ratio | cm3 | 23 |
Theoretical injection capacity | cm3 | 3542 |
Shot weight(PS) | g | 3259 |
oz | 115.2 | |
Injection rate into Air | cm^3/s | 836 |
Injection rate into Air | g/s | 730 |
Injection pressure | MPa | 165 |
Theoretical plasticizing speed | g/S (PS) | 155 |
Theoretical plasticizing speed | g/S (HDPE) | 190 |
Max. injection speed | mm/s | 118 |
Screw speed | r/min | 169 |
Injection stroke | mm | 500 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 91.6∼92.4 |
Number of Motors | PC | 2 |
Electric Pre-Plastic Motor Power | KW | * |
Heater Power | KW | 45 |
Number of temp. control zones | 5+2 | |
Clamping force | kN | 7000 |
Opening stroke | mm | 1150 |
Space between tie bar | mmxmm | 955×855 |
Min. mould height | mm | 400 |
Max. mould height | mm | 960 |
Max. Daylight | mm | 2110 |
Ejector stroke | mm | 260 |
Ejector force forward | kN | 166 |
Ejector force back | kN | 117 |
Number of ejector bar | PC | 21 |
Heat Capacity | kg | 100 |
Oil tank capacity | L | 900 |
Machine dimensions(LxWxH) | mxmxm | 10×2.3×2.9 |
Machine weight | Ton | 19.5 |
BL900/1200-60L
Description | Unit | BL900/1200-60L |
International Specification | C8600 | |
Screw diameter | mm | 110 |
Screw ratio | cm3 | 23 |
Theoretical injection capacity | cm3 | 5177 |
Shot weight(PS) | g | 4763 |
oz | 168.3 | |
Injection rate into Air | cm^3/s | 919 |
Injection rate into Air | g/s | 836 |
Injection pressure | MPa | 167 |
Theoretical plasticizing speed | g/S (PS) | 170 |
Theoretical plasticizing speed | g/S (HDPE) | 190 |
Max. injection speed | mm/s | 97 |
Screw speed | r/min | 169 |
Injection stroke | mm | 545 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 101.4∼1.05.4 |
Number of Motors | PC | 2 |
Electric Pre-Plastic Motor Power | KW | * |
Heater Power | KW | 55 |
Number of temp. control zones | 5+2 | |
Clamping force | kN | 9000 |
Opening stroke | mm | 1350 |
Space between tie bar | mmxmm | 1110×1010 |
Min. mould height | mm | 450 |
Max. mould height | mm | 1110 |
Max. Daylight | mm | 2460 |
Ejector stroke | mm | 300 |
Ejector force forward | kN | 232 |
Ejector force back | kN | 132 |
Number of ejector bar | PC | 21 |
Heat Capacity | kg | 100 |
Oil tank capacity | L | 1070 |
Machine dimensions(LxWxH) | mxmxm | 11.3×2.6×3.1 |
Machine weight | Ton | 38 |
BL1200/1600-120L
Description | Unit | BL1200/1600-120L |
International Specification | C15500 | |
Screw diameter | mm | 130 |
Screw ratio | cm3 | 23 |
Theoretical injection capacity | cm3 | 11675 |
Shot weight(PS) | g | 10741 |
oz | 379.5 | |
Injection rate into Air | cm^3/s | 1525 |
Injection rate into Air | g/s | 1388 |
Injection pressure | MPa | 133 |
Theoretical plasticizing speed | g/S (PS) | 224 |
Theoretical plasticizing speed | g/S (HDPE) | 190 |
Max. injection speed | mm/s | 115 |
Screw speed | r/min | 97 |
Injection stroke | mm | 880 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 128.1∼141.9 |
Number of Motors | PC | 3 |
Electric Pre-Plastic Motor Power | KW | 125 |
Heater Power | KW | 80 |
Number of temp. control zones | 6+2 | |
Clamping force | kN | 12000 |
Opening stroke | mm | 1700 |
Space between tie bar | mmxmm | 1260×1120 |
Min. mould height | mm | 580 |
Max. mould height | mm | 1450 |
Max. Daylight | mm | 3150 |
Ejector stroke | mm | 350 |
Ejector force forward | kN | 248 |
Ejector force back | kN | 165 |
Number of ejector bar | PC | 21 |
Heat Capacity | kg | 200 |
Oil tank capacity | L | 1350 |
Machine dimensions(LxWxH) | mxmxm | 13.2×3.6×4.2 |
Machine weight | Ton | 52 |
BL1650/2200-240L
Description | Unit | BL1650/2200-240L |
International Specification | C32000 | |
Screw diameter | mm | 160 |
Screw ratio | cm3 | 23 |
Theoretical injection capacity | cm3 | 22508 |
Shot weight(PS) | g | 20707 |
oz | 731.7 | |
Injection rate into Air | cm^3/s | 2068 |
Injection rate into Air | g/s | 1882 |
Injection pressure | MPa | 141 |
Theoretical plasticizing speed | g/S (PS) | 350 |
Theoretical plasticizing speed | g/S (HDPE) | 300 |
Max. injection speed | mm/s | 103 |
Screw speed | r/min | 80 |
Injection stroke | mm | 1120 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 193∼197.8 |
Number of Motors | PC | 4 |
Electric Pre-Plastic Motor Power | KW | 167 |
Heater Power | KW | 95 |
Number of temp. control zones | 6+2 | |
Clamping force | kN | 16500 |
Opening stroke | mm | 1520×1320 |
Space between tie bar | mmxmm | 650 |
Min. mould height | mm | 1550 |
Max. mould height | mm | 3500 |
Max. Daylight | mm | 400 |
Ejector stroke | mm | 363 |
Ejector force forward | kN | 280 |
Ejector force back | kN | 29 |
Number of ejector bar | PC | 400 |
Heat Capacity | kg | 1700 |
Oil tank capacity | L | 15.6×3.7×4.4 |
Machine dimensions(LxWxH) | mxmxm | 94 |
Machine weight | Ton |
BL1850/2400-240L
Description | Unit | BL1850/2400-240L |
International Specification | C32000 | |
Screw diameter | mm | 160 |
Screw ratio | cm3 | 23 |
Theoretical injection capacity | cm3 | 22508 |
Shot weight(PS) | g | 20707 |
oz | 731.7 | |
Injection rate into Air | cm^3/s | 2068 |
Injection rate into Air | g/s | 1882 |
Injection pressure | MPa | 141 |
Theoretical plasticizing speed | g/S (PS) | 350 |
Theoretical plasticizing speed | g/S (HDPE) | 300 |
Max. injection speed | mm/s | 103 |
Screw speed | r/min | 80 |
Injection stroke | mm | 1120 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 193∼197.8 |
Number of Motors | PC | 4 |
Electric Pre-Plastic Motor Power | KW | 167 |
Heater Power | KW | 95 |
Number of temp. control zones | 6+2 | |
Clamping force | kN | 18500 |
Opening stroke | mm | 2150 |
Space between tie bar | mmxmm | 1620×1420 |
Min. mould height | mm | 750 |
Max. mould height | mm | 1600 |
Max. Daylight | mm | 3750 |
Ejector stroke | mm | 400 |
Ejector force forward | kN | 363 |
Ejector force back | kN | 280 |
Number of ejector bar | PC | 29 |
Heat Capacity | kg | 400 |
Oil tank capacity | L | 1700 |
Machine dimensions(LxWxH) | mxmxm | 16.1×3.9×4.6 |
Machine weight | Ton | 107 |
BL2200/2500-240L
Description | Unit | BL2200/2500-240L |
International Specification | C54000 | |
Screw diameter | mm | 190 |
Screw ratio | cm3 | 23 |
Theoretical injection capacity | cm3 | 36840 |
Shot weight(PS) | g | 33893 |
oz | 1197.6 | |
Injection rate into Air | cm^3/s | 2095 |
Injection rate into Air | g/s | 1906 |
Injection pressure | MPa | 146 |
Theoretical plasticizing speed | g/S (PS) | 450 |
Theoretical plasticizing speed | g/S (HDPE) | 440 |
Max. injection speed | mm/s | 74 |
Screw speed | r/min | 63 |
Injection stroke | mm | 1300 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 202.8∼210.8 |
Number of Motors | PC | 4 |
Electric Pre-Plastic Motor Power | KW | 209 |
Heater Power | KW | 233 |
Number of temp. control zones | 7+1 | |
Clamping force | kN | 22000 |
Opening stroke | mm | 2200 |
Space between tie bar | mmxmm | 1720×1520 |
Min. mould height | mm | 750 |
Max. mould height | mm | 1700 |
Max. Daylight | mm | 3900 |
Ejector stroke | mm | 450 |
Ejector force forward | kN | 465 |
Ejector force back | kN | 365 |
Number of ejector bar | PC | 33 |
Heat Capacity | kg | 400 |
Oil tank capacity | L | 1950 |
Machine dimensions(LxWxH) | mxmxm | 1834×4.1×4.6 |
Machine weight | Ton | 140 |
BL2500/2800-660L
Description | Unit | BL2500/2800-660L |
International Specification | C72000 | |
Screw diameter | mm | 220 |
Screw ratio | cm3 | 21 |
Theoretical injection capacity | cm3 | 51672 |
Shot weight(PS) | g | 47538 |
oz | 1679.8 | |
Injection rate into Air | cm^3/s | 2624 |
Injection rate into Air | g/s | 2388 |
Injection pressure | MPa | 140 |
Theoretical plasticizing speed | g/S (PS) | 520 |
Theoretical plasticizing speed | g/S (HDPE) | 440 |
Max. injection speed | mm/s | 69 |
Screw speed | r/min | 63 |
Injection stroke | mm | 1360 |
Sys. Pressure | MPa | 17.5 |
Pump Motor(Min∼Max) | kW | 243.7∼250.5 |
Number of Motors | PC | 5 |
Electric Pre-Plastic Motor Power | KW | 314 |
Heater Power | KW | 233 |
Number of temp. control zones | 7+1 | |
Clamping force | kN | 25000 |
Opening stroke | mm | 2250 |
Space between tie bar | mmxmm | 1820×1620 |
Min. mould height | mm | 800 |
Max. mould height | mm | 1800 |
Max. Daylight | mm | 4050 |
Ejector stroke | mm | 500 |
Ejector force forward | kN | 465 |
Ejector force back | kN | 365 |
Number of ejector bar | PC | 33 |
Heat Capacity | kg | 400 |
Oil tank capacity | L | 2500 |
Machine dimensions(LxWxH) | mxmxm | 19.6×4.3×4.9 |
Machine weight | Ton | 170 |