DK SERIES
Technical Data
BL520DK
BL650DK
BL800DK
BL1000DK
BL1100DK
BL1400DK
BL1700DK
BL2000DK
BL2300DK
BL2700DK
BL3000DK
BL3500DK
BL4000DK
BL5000DK
BL6800DK
BL1050DK/Z7900
BL1200DK/Z7900
BL1300DK/Z10000
BL1500DK/Z13400
BL1850DK/Z19300
BL2100DK/Z19300
BL2500DK/Z25800
BL2800DK/Z36800
BL3200DK/Z36800
BL520DK
| Description | Unit | BL20DK | ||
| Injection Unit | ||||
| International Specification | Z2950 | |||
| Screw diameter | mm | 70 | 75 | 85 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 1423 | 1634 | 2099 |
| Max. Shot weight(PS) | g | 1310 | 1503 | 1931 |
| oz | 46 | 53 | 68 | |
| Max. injection speed | mm/s | 120 | ||
| Injection rate into Air | cm^3/s | 470 | 540 | 694 |
| Injection rate into Air(PS) | g/s | 433 | 497 | 638 |
| Specific Injection pressure | MPa | 212 | 185 | 144 |
| Max. Screw speed | r/min | 160 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 531 | ||
| Clamping force | kN | 5200 | ||
| Platen Dimension(hxv) | mmxmm | 1250×1200 | ||
| Distance between tie bars(hxv) | mmxmm | 860×810 | ||
| Opening stroke | mm | 1100/600 | ||
| Min. mould height | mm | 350 | ||
| Max. mould height | mm | 850 | ||
| Max. Daylight | mm | 1450 | ||
| Ejector stroke | mm | 250 | ||
| Ejector force forward | kN | 124 | ||
| Ejector force back | kN | 75 | ||
| Number of ejector ping | PC | 13 | ||
| Driving and Heating | ||||
| Heater Power | kW | 27 | 29.2 | 31.4 |
| Pump Motor | kW | 42+30 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 600 | ||
| Maximum mould weight | kg | 6500 | ||
| Machine weight | ton | 18 | ||
| Machine dimension(LxWxH) | mxmxm | 7.39×2.46×2.68 | ||
BL650DK
| Description | Unit | BL650DK | ||
| Injection Unit | ||||
| International Specification | Z3700 | |||
| Screw diameter | mm | 75 | 80 | 90 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 1832 | 2085 | 2639 |
| Max. Shot weight(PS) | g | 1686 | 1918 | 2428 |
| oz | 59 | 68 | 86 | |
| Max. injection speed | mm/s | 119 | ||
| Injection rate into Air | cm^3/s | 525 | 598 | 756 |
| Injection rate into Air(PS) | g/s | 478 | 544 | 688 |
| Specific Injection pressure | MPa | 204 | 179 | 142 |
| Max. Screw speed | r/min | 147 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 663 | ||
| Clamping force | kN | 6500 | ||
| Platen Dimension(hxv) | mmxmm | 1380×1280 | ||
| Distance between tie bars(hxv) | mmxmm | 960×860 | ||
| Opening stroke | mm | 1300/750 | ||
| Min. mould height | mm | 350 | ||
| Max. mould height | mm | 900 | ||
| Max. Daylight | mm | 1650 | ||
| Ejector stroke | mm | 250 | ||
| Ejector force forward | kN | 124 | ||
| Ejector force back | kN | 75 | ||
| Number of ejector ping | PC | 21 | ||
| Driving and Heating | ||||
| Heater Power | kW | 32 | 35.5 | 37.5 |
| Pump Motor | kW | 42+42 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 800 | ||
| Maximum mould weight | kg | 8000 | ||
| Machine weight | ton | 22 | ||
| Machine dimension(LxWxH) | mxmxm | 7.75×2.57×2.96 | ||
BL800DK
| Description | Unit | BL800DK | ||
| Injection Unit | ||||
| International Specification | Z4800 | |||
| Screw diameter | mm | 80 | 85 | 90 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 2286 | 2581 | 2893 |
| Max. Shot weight(PS) | g | 2103 | 2374 | 2662 |
| oz | 74 | 84 | 94 | |
| Max. injection speed | mm/s | 116 | ||
| Injection rate into Air | cm^3/s | 583 | 659 | 738 |
| Injection rate into Air(PS) | g/s | 536 | 599 | 672 |
| Specific Injection pressure | MPa | 210 | 186 | 166 |
| Max. Screw speed | r/min | 140 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 816 | ||
| Clamping force | kN | 8000 | ||
| Platen Dimension(hxv) | mmxmm | 1510×1380 | ||
| Distance between tie bars(hxv) | mmxmm | 1060×920 | ||
| Opening stroke | mm | 1400/800 | ||
| Min. mould height | mm | 400 | ||
| Max. mould height | mm | 1000 | ||
| Max. Daylight | mm | 1800 | ||
| Ejector stroke | mm | 280 | ||
| Ejector force forward | kN | 232 | ||
| Ejector force back | kN | 155 | ||
| Number of ejector ping | PC | 17 | ||
| Driving and Heating | ||||
| Heater Power | kW | 36 | 38.3 | 40.6 |
| Pump Motor | kW | 50+42 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 900 | ||
| Maximum mould weight | kg | 9500 | ||
| Machine weight | ton | 26 | ||
| Machine dimension(LxWxH) | mxmxm | 8.35×2.93×2.95 | ||
BL1000DK
| Description | Unit | BL1000DK | ||
| Injection Unit | ||||
| International Specification | Z5900 | |||
| Screw diameter | mm | 80 | 90 | 100 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 2512 | 3179 | 3925 |
| Max. Shot weight(PS) | g | 2311 | 2925 | 3611 |
| oz | 82 | 103 | 127 | |
| Max. injection speed | mm/s | 106 | ||
| Injection rate into Air | cm^3/s | 533 | 675 | 833 |
| Injection rate into Air(PS) | g/s | 490 | 621 | 766 |
| Specific Injection pressure | MPa | 230 | 182 | 147 |
| Max. Screw speed | r/min | 135 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1020 | ||
| Clamping force | kN | 10000 | ||
| Platen Dimension(hxv) | mmxmm | 1630×1550 | ||
| Distance between tie bars(hxv) | mmxmm | 1160×1020 | ||
| Opening stroke | mm | 1600/950 | ||
| Min. mould height | mm | 450 | ||
| Max. mould height | mm | 1100 | ||
| Max. Daylight | mm | 2050 | ||
| Ejector stroke | mm | 280 | ||
| Ejector force forward | kN | 232 | ||
| Ejector force back | kN | 155 | ||
| Number of ejector ping | PC | 17 | ||
| Driving and Heating | ||||
| Heater Power | kW | 43 | 48.5 | 54 |
| Pump Motor | kW | 50+42 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 1000 | ||
| Maximum mould weight | kg | 12000 | ||
| Machine weight | ton | 35 | ||
| Machine dimension(LxWxH) | mxmxm | 9.15×3.19×3.13 | ||
BL1100DK
| Description | Unit | BL1100DK | ||
| Injection Unit | ||||
| International Specification | Z7900 | |||
| Screw diameter | mm | 90 | 100 | 110 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 3467 | 4280 | 5180 |
| Max. Shot weight(PS) | g | 3189 | 3938 | 4765 |
| oz | 112 | 138 | 168 | |
| Max. injection speed | mm/s | 104 | ||
| Injection rate into Air | cm^3/s | 666 | 822 | 995 |
| Injection rate into Air(PS) | g/s | 612 | 756 | 915 |
| Specific Injection pressure | MPa | 230 | 186 | 154 |
| Max. Screw speed | r/min | 120 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1122 | ||
| Clamping force | kN | 11000 | ||
| Platen Dimension(hxv) | mmxmm | 1825×1685 | ||
| Distance between tie bars(hxv) | mmxmm | 1260×1120 | ||
| Opening stroke | mm | 1870/1150 | ||
| Min. mould height | mm | 480 | ||
| Max. mould height | mm | 1200 | ||
| Max. Daylight | mm | 2350 | ||
| Ejector stroke | mm | 320 | ||
| Ejector force forward | kN | 232 | ||
| Ejector force back | kN | 155 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 50 | 54.2 | 58.4 |
| Pump Motor | kW | 50+17+42 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 1100 | ||
| Maximum mould weight | kg | 15000 | ||
| Machine weight | ton | 45 | ||
| Machine dimension(LxWxH) | mxmxm | 10.18×3.31×3.17 | ||
BL1400DK
| Description | Unit | BL1400DK | ||
| Injection Unit | ||||
| International Specification | Z13400 | |||
| Screw diameter | mm | 110 | 120 | 130 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 6082 | 7238 | 8495 |
| Max. Shot weight(PS) | g | 5596 | 6659 | 7815 |
| oz | 197 | 235 | 276 | |
| Max. injection speed | mm/s | 102 | ||
| Injection rate into Air | cm^3/s | 969 | 1153 | 1353 |
| Injection rate into Air(PS) | g/s | 891 | 1060 | 1245 |
| Specific Injection pressure | MPa | 221 | 186 | 158 |
| Max. Screw speed | r/min | 100 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1429 | ||
| Clamping force | kN | 14000 | ||
| Platen Dimension(hxv) | mmxmm | 2090×1990 | ||
| Distance between tie bars(hxv) | mmxmm | 1420×1320 | ||
| Opening stroke | mm | 2200/1500 | ||
| Min. mould height | mm | 650 | ||
| Max. mould height | mm | 1350 | ||
| Max. Daylight | mm | 2850 | ||
| Ejector stroke | mm | 360 | ||
| Ejector force forward | kN | 309 | ||
| Ejector force back | kN | 210 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 72 | 75 | 87 |
| Pump Motor | kW | 50+50+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 1600 | ||
| Maximum mould weight | kg | 21000 | ||
| Machine weight | ton | 60 | ||
| Machine dimension(LxWxH) | mxmxm | 11.53×3.51×3.81 | ||
BL1700DK
| Description | Unit | BL1700DK | ||
| Injection Unit | ||||
| International Specification | Z19300 | |||
| Screw diameter | mm | 120 | 135 | 145 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 8200 | 10378 | 11972 |
| Max. Shot weight(PS) | g | 7544 | 9547 | 11014 |
| oz | 266 | 337 | 388 | |
| Max. injection speed | mm/s | 100 | ||
| Injection rate into Air | cm^3/s | 1170 | 1481 | 1708 |
| Injection rate into Air(PS) | g/s | 1076 | 1362 | 1572 |
| Specific Injection pressure | MPa | 236 | 186 | 161 |
| Max. Screw speed | r/min | 100 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1735 | ||
| Clamping force | kN | 17000 | ||
| Platen Dimension(hxv) | mmxmm | 2260×2100 | ||
| Distance between tie bars(hxv) | mmxmm | 1620×1460 | ||
| Opening stroke | mm | 2570/1700 | ||
| Min. mould height | mm | 680 | ||
| Max. mould height | mm | 1550 | ||
| Max. Daylight | mm | 3250 | ||
| Ejector stroke | mm | 400 | ||
| Ejector force forward | kN | 309 | ||
| Ejector force back | kN | 210 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 75 | 96 | 115 |
| Pump Motor | kW | 50+50+42+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 35000 | ||
| Machine weight | ton | 75 | ||
| Machine dimension(LxWxH) | mxmxm | 13.23×4.05×4.11 | ||
BL2000DK
| Description | Unit | BL2000DK | ||
| Injection Unit | ||||
| International Specification | Z19300 | |||
| Screw diameter | mm | 120 | 135 | 145 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 8200 | 10378 | 11972 |
| Max. Shot weight(PS) | g | 7544 | 9547 | 11014 |
| oz | 266 | 337 | 388 | |
| Max. injection speed | mm/s | 100 | ||
| Injection rate into Air | cm^3/s | 1170 | 1481 | 1708 |
| Injection rate into Air(PS) | g/s | 1076 | 1362 | 1572 |
| Specific Injection pressure | MPa | 236 | 186 | 161 |
| Max. Screw speed | r/min | 100 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 2041 | ||
| Clamping force | kN | 20000 | ||
| Platen Dimension(hxv) | mmxmm | 2480×2320 | ||
| Distance between tie bars(hxv) | mmxmm | 1720×1560 | ||
| Opening stroke | mm | 2580/1700 | ||
| Min. mould height | mm | 720 | ||
| Max. mould height | mm | 1600 | ||
| Max. Daylight | mm | 3300 | ||
| Ejector stroke | mm | 450 | ||
| Ejector force forward | kN | 496 | ||
| Ejector force back | kN | 396 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 75 | 96 | 115 |
| Pump Motor | kW | 50+50+42+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 42000 | ||
| Machine weight | ton | 90 | ||
| Machine dimension(LxWxH) | mxmxm | 13.41×4.34×4.20 | ||
BL2300DK
| Description | Unit | BL2300DK | ||
| Injection Unit | ||||
| International Specification | Z25800 | |||
| Screw diameter | mm | 140 | 150 | 160 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 12084 | 13872 | 15783 |
| Max. Shot weight(PS) | g | 11117 | 12762 | 14521 |
| oz | 392 | 450 | 512 | |
| Max. injection speed | mm/s | 90 | ||
| Injection rate into Air | cm^3/s | 1361 | 1562 | 1778 |
| Injection rate into Air(PS) | g/s | 1252 | 1437 | 1636 |
| Specific Injection pressure | MPa | 213 | 186 | 164 |
| Max. Screw speed | r/min | 84 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 2347 | ||
| Clamping force | kN | 23000 | ||
| Platen Dimension(hxv) | mmxmm | 2560×2360 | ||
| Distance between tie bars(hxv) | mmxmm | 1820×1620 | ||
| Opening stroke | mm | 2720/1800 | ||
| Min. mould height | mm | 780 | ||
| Max. mould height | mm | 1700 | ||
| Max. Daylight | mm | 3500 | ||
| Ejector stroke | mm | 450 | ||
| Ejector force forward | kN | 465 | ||
| Ejector force back | kN | 310 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 109 | 123 | 128 |
| Pump Motor | kW | 50+50+50+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2700 | ||
| Maximum mould weight | kg | 50000 | ||
| Machine weight | ton | 120 | ||
| Machine dimension(LxWxH) | mxmxm | 14.57×4.27×4.20 | ||
BL2700DK
| Description | Unit | BL2700DK | ||
| Injection Unit | ||||
| International Specification | Z36800 | |||
| Screw diameter | mm | 160 | 170 | 185 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 18598 | 20996 | 24864 |
| Max. Shot weight(PS) | g | 17110 | 19316 | 22875 |
| oz | 603 | 681 | 807 | |
| Max. injection speed | mm/s | 85 | ||
| Injection rate into Air | cm^3/s | 1855 | 2094 | 2480 |
| Injection rate into Air(PS) | g/s | 1707 | 1927 | 2282 |
| Specific Injection pressure | MPa | 198 | 175 | 148 |
| Max. Screw speed | r/min | 69 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 2755 | ||
| Clamping force | kN | 27000 | ||
| Platen Dimension(hxv) | mmxmm | 2700×2500 | ||
| Distance between tie bars(hxv) | mmxmm | 1920×1720 | ||
| Opening stroke | mm | 2920/1900 | ||
| Min. mould height | mm | 780 | ||
| Max. mould height | mm | 1800 | ||
| Max. Daylight | mm | 3700 | ||
| Ejector stroke | mm | 500 | ||
| Ejector force forward | kN | 465 | ||
| Ejector force back | kN | 310 | ||
| Number of ejector ping | PC | 29 | ||
| Driving and Heating | ||||
| Heater Power | kW | 128 | 158 | 173 |
| Pump Motor | kW | 50+50+50+50+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 68000 | ||
| Machine weight | ton | 135 | ||
| Machine dimension(LxWxH) | mxmxm | 15.98×4.45×4.41 | ||
BL3000DK
| Description | Unit | BL3000DK | ||
| Injection Unit | ||||
| International Specification | Z36800 | |||
| Screw diameter | mm | 160 | 170 | 185 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 18598 | 20996 | 24864 |
| Max. Shot weight(PS) | g | 17110 | 19316 | 22875 |
| oz | 603 | 681 | 807 | |
| Max. injection speed | mm/s | 95 | ||
| Injection rate into Air | cm^3/s | 1932 | 2182 | 2583 |
| Injection rate into Air(PS) | g/s | 1778 | 2007 | 2377 |
| Specific Injection pressure | MPa | 198 | 175 | 148 |
| Max. Screw speed | r/min | 69 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 3061 | ||
| Clamping force | kN | 30000 | ||
| Platen Dimension(hxv) | mmxmm | 2850×2650 | ||
| Distance between tie bars(hxv) | mmxmm | 2020×1820 | ||
| Opening stroke | mm | 3020/2000 | ||
| Min. mould height | mm | 880 | ||
| Max. mould height | mm | 1900 | ||
| Max. Daylight | mm | 3900 | ||
| Ejector stroke | mm | 500 | ||
| Ejector force forward | kN | 465 | ||
| Ejector force back | kN | 310 | ||
| Number of ejector ping | PC | 29 | ||
| Driving and Heating | ||||
| Heater Power | kW | 128 | 158 | 173 |
| Pump Motor | kW | 50+50+50+50+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 3200 | ||
| Maximum mould weight | kg | 72000 | ||
| Machine weight | ton | 155 | ||
| Machine dimension(LxWxH) | mxmxm | 16.13×4.92×4.49 | ||
BL3500DK
| Description | Unit | BL3500DK | ||
| Injection Unit | ||||
| International Specification | Z58100 | |||
| Screw diameter | mm | 185 | 200 | 220 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 28224 | 32987 | 39914 |
| Max. Shot weight(PS) | g | 25966 | 30348 | 36720 |
| oz | 916 | 1070 | 1295 | |
| Max. injection speed | mm/s | 66 | ||
| Injection rate into Air | cm^3/s | 1775 | 2074 | 2510 |
| Injection rate into Air(PS) | g/s | 1633 | 1908 | 2309 |
| Specific Injection pressure | MPa | 206 | 176 | 146 |
| Max. Screw speed | r/min | 60 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 3571 | ||
| Clamping force | kN | 35000 | ||
| Platen Dimension(hxv) | mmxmm | 3120×2820 | ||
| Distance between tie bars(hxv) | mmxmm | 2220×1920 | ||
| Opening stroke | mm | 3180/2160 | ||
| Min. mould height | mm | 980 | ||
| Max. mould height | mm | 2000 | ||
| Max. Daylight | mm | 4160 | ||
| Ejector stroke | mm | 550 | ||
| Ejector force forward | kN | 465 | ||
| Ejector force back | kN | 310 | ||
| Number of ejector ping | PC | 33 | ||
| Driving and Heating | ||||
| Heater Power | kW | 173 | 216 | 236 |
| Pump Motor | kW | 50+50+50+50+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 80000 | ||
| Machine weight | ton | 195 | ||
| Machine dimension(LxWxH) | mxmxm | 17.91×5.12×4.69 | ||
BL4000DK
| Description | Unit | BL4000DK | ||
| Injection Unit | ||||
| International Specification | Z79800 | |||
| Screw diameter | mm | 200 | 220 | 240 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 38013 | 45996 | 54739 |
| Max. Shot weight(PS) | g | 34972 | 42316 | 50360 |
| oz | 1233 | 1492 | 1776 | |
| Max. injection speed | mm/s | 55 | ||
| Injection rate into Air | cm^3/s | 1750 | 2117 | 2520 |
| Injection rate into Air(PS) | g/s | 1610 | 1948 | 2318 |
| Specific Injection pressure | MPa | 210 | 174 | 146 |
| Max. Screw speed | r/min | 54 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 4082 | ||
| Clamping force | kN | 40000 | ||
| Platen Dimension(hxv) | mmxmm | 3320×2900 | ||
| Distance between tie bars(hxv) | mmxmm | 2420×2000 | ||
| Opening stroke | mm | 3480/2260 | ||
| Min. mould height | mm | 980 | ||
| Max. mould height | mm | 2200 | ||
| Max. Daylight | mm | 4460 | ||
| Ejector stroke | mm | 550 | ||
| Ejector force forward | kN | 619 | ||
| Ejector force back | kN | 420 | ||
| Number of ejector ping | PC | 33 | ||
| Driving and Heating | ||||
| Heater Power | kW | 216 | 236 | 263 |
| Pump Motor | kW | 50+50+50+50+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 100000 | ||
| Machine weight | ton | 254 | ||
| Machine dimension(LxWxH) | mxmxm | 20.50×5.32×4.99 | ||
BL5000DK
| Description | Unit | BL5000DK | ||
| Injection Unit | ||||
| International Specification | Z79800 | |||
| Screw diameter | mm | 200 | 220 | 240 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 38013 | 45996 | 54739 |
| Max. Shot weight(PS) | g | 34972 | 42316 | 50360 |
| oz | 1233 | 1492 | 1776 | |
| Max. injection speed | mm/s | 55 | ||
| Injection rate into Air | cm^3/s | 1750 | 2117 | 2520 |
| Injection rate into Air(PS) | g/s | 1610 | 1948 | 2318 |
| Specific Injection pressure | MPa | 210 | 174 | 146 |
| Max. Screw speed | r/min | 54 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 5102 | ||
| Clamping force | kN | 50000 | ||
| Platen Dimension(hxv) | mmxmm | 3570×3020 | ||
| Distance between tie bars(hxv) | mmxmm | 2550×2000 | ||
| Opening stroke | mm | 3680/2460 | ||
| Min. mould height | mm | 1080 | ||
| Max. mould height | mm | 2300 | ||
| Max. Daylight | mm | 4760 | ||
| Ejector stroke | mm | 550 | ||
| Ejector force forward | kN | 619 | ||
| Ejector force back | kN | 420 | ||
| Number of ejector ping | PC | 33 | ||
| Driving and Heating | ||||
| Heater Power | kW | 216 | 236 | 263 |
| Pump Motor | kW | 50+50+50+50+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 100000 | ||
| Machine weight | ton | 330 | ||
| Machine dimension(LxWxH) | mxmxm | 23.5×5.6×5.0 | ||
BL6800DK
| Description | Unit | BL6800DK | ||
| Injection Unit | ||||
| International Specification | Z119000 | |||
| Screw diameter | mm | 220 | 240 | 260 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 57780 | 68763 | 80701 |
| Max. Shot weight(PS) | g | 53157 | 63262 | 74245 |
| oz | 1875 | 2231 | 2619 | |
| Max. injection speed | mm/s | 50 | ||
| Injection rate into Air | cm^3/s | 2138 | 2545 | 2987 |
| Injection rate into Air(PS) | g/s | 1968 | 2342 | 2748 |
| Specific Injection pressure | MPa | 208 | 174 | 148 |
| Max. Screw speed | r/min | 50 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 6939 | ||
| Clamping force | kN | 68000 | ||
| Platen Dimension(hxv) | mmxmm | 4150×3450 | ||
| Distance between tie bars(hxv) | mmxmm | 3000×2300 | ||
| Opening stroke | mm | 4200/2900 | ||
| Min. mould height | mm | 1200 | ||
| Max. mould height | mm | 2500 | ||
| Max. Daylight | mm | 5400 | ||
| Ejector stroke | mm | 1000 | ||
| Ejector force forward | kN | 891 | ||
| Ejector force back | kN | 616 | ||
| Number of ejector ping | PC | 33 | ||
| Driving and Heating | ||||
| Heater Power | kW | 236 | 263 | 290 |
| Pump Motor | kW | 50+50+50+50+50+42 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2600 | ||
| Maximum mould weight | kg | 180000 | ||
| Machine weight | ton | 420 | ||
| Machine dimension(LxWxH) | mxmxm | 25.5×6.5×6.0 | ||
BL1050DK/Z7900
| International Specification | Z7900 | BL1050DK/Z7900 | ||
| Screw diameter | mm | 90 | 100 | 110 |
| Screw aspect ratio | 23 | 23 | 23 | |
| Theoretical injection volume | cm3 | 3467 | 4280 | 5180 |
| Shot volume (PS) | g | 3189 | 3938 | 4765 |
| oz | 112 | 138 | 168 | |
| Injection speed | mm/s | 104 | ||
| Injection rate | cm^3/s | 666 | 822 | 995 |
| g/s | 612 | 756 | 915 | |
| Injection pressure | MPa | 230 | 186 | 154 |
| Screw speed | r/min | 120 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1071 | ||
| Clamping force | kN | 10500 | ||
| Platen Dimension(hxv) | mmxmm | 1985×1725 | ||
| Distance between tie bars(hxv) | mmxmm | 1440×1180 | ||
| Opening stroke | mm | 2270/1500 | ||
| Min. mould height | mm | 580 | ||
| Max. mould height | mm | 1350 | ||
| Max. Daylight | mm | 2850 | ||
| Ejector stroke | mm | 320 | ||
| Ejector force forward | kN | 232 | ||
| Ejector force back | kN | 155 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 50 | 54.2 | 58.4 |
| Pump Motor | kW | 50+17+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 1100 | ||
| Maximum mould weight | kg | 15000 | ||
| Machine weight | ton | 49 | ||
| Machine dimension(LxWxH) | mxmxm | 10.78×3.52×3.2 | ||
BL1200DK/Z7900
| International Specification | Z7900 | BL1200DK/Z7900 | ||
| Screw diameter | mm | 90 | 100 | 110 |
| Screw aspect ratio | 23 | 23 | 23 | |
| Theoretical injection volume | cm3 | 3467 | 4280 | 5180 |
| Shot volume (PS) | g | 3189 | 3938 | 4765 |
| oz | 112 | 138 | 168 | |
| Injection speed | mm/s | 104 | ||
| Injection rate | cm^3/s | 666 | 822 | 995 |
| g/s | 612 | 756 | 915 | |
| Injection pressure | MPa | 230 | 186 | 154 |
| Screw speed | r/min | 120 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1224 | ||
| Clamping force | kN | 12000 | ||
| Platen Dimension(hxv) | mmxmm | 1985×1725 | ||
| Distance between tie bars(hxv) | mmxmm | 1420×1160 | ||
| Opening stroke | mm | 2270/1500 | ||
| Min. mould height | mm | 580 | ||
| Max. mould height | mm | 1350 | ||
| Max. Daylight | mm | 2850 | ||
| Ejector stroke | mm | 320 | ||
| Ejector force forward | kN | 232 | ||
| Ejector force back | kN | 155 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 50 | 54.2 | 58.4 |
| Pump Motor | kW | 50+17+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 1100 | ||
| Maximum mould weight | kg | 15000 | ||
| Machine weight | ton | 49 | ||
| Machine dimension(LxWxH) | mxmxm | 10.78×3.52×3.2 | ||
BL1300DK/Z10000
| International Specification | Z10000 | BL1300DK/Z10000 | ||
| Screw diameter | mm | 100 | 110 | 120 |
| Screw aspect ratio | 23 | 23 | 23 | |
| Theoretical injection volume | cm3 | 4671 | 5652 | 6726 |
| Shot volume (PS) | g | 4297 | 5199 | 6188 |
| oz | 152 | 184 | 219 | |
| Injection speed | mm/s | 104 | ||
| Injection rate | cm^3/s | 820 | 992 | 1180 |
| g/s | 746 | 902 | 1074 | |
| Injection pressure | MPa | 215 | 178 | 149 |
| Screw speed | r/min | 105 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1327 | ||
| Clamping force | kN | 13000 | ||
| Platen Dimension(hxv) | mmxmm | 1985×1725 | ||
| Distance between tie bars(hxv) | mmxmm | 1420×1160 | ||
| Opening stroke | mm | 2270/1500 | ||
| Min. mould height | mm | 580 | ||
| Max. mould height | mm | 1350 | ||
| Max. Daylight | mm | 2850 | ||
| Ejector stroke | mm | 320 | ||
| Ejector force forward | kN | 232 | ||
| Ejector force back | kN | 155 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 56.2 | 60.4 | 62.4 |
| Pump Motor | kW | 50+21+50 | ||
| System Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 1100 | ||
| Maximum mould weight | kg | 15000 | ||
| Machine weight | ton | 52 | ||
| Machine dimension(LxWxH) | mxmxm | 10.78×3.52×3.64 | ||
BL1500DK/Z13400
| International Specification | Unit | BL1500DK/Z13400 | ||
| Screw diameter | mm | 110 | 120 | 130 |
| Screw ratio | 23 | 23 | 23 | |
| Theoretical injection capacity | cm3 | 6082 | 7238 | 8495 |
| Max. Shot weight(PS) | g | 5596 | 6659 | 7815 |
| oz | 197 | 235 | 276 | |
| Max. injection speed | mm/s | 102 | ||
| Injection rate into Air | cm^3/s | 969 | 1153 | 1353 |
| Injection rate into Air(PS) | g/s | 891 | 1060 | 1245 |
| Specific Injection pressure | MPa | 221 | 186 | 158 |
| Max. Screw speed | r/min | 100 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1531 | ||
| Clamping force | kN | 15000 | ||
| Platen Dimension(hxv) | mmxmm | 2190×2070 | ||
| Distance between tie bars(hxv) | mmxmm | 1520×1360 | ||
| Opening stroke | mm | 2200/1500 | ||
| Min. mould height | mm | 650 | ||
| Max. mould height | mm | 1350 | ||
| Max. Daylight | mm | 2850 | ||
| Ejector stroke | mm | 360 | ||
| Ejector force forward | kN | 309 | ||
| Ejector force back | kN | 210 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 72 | 75 | 87 |
| Pump Motor | kW | 50+50+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 1600 | ||
| Maximum mould weight | kg | 21000 | ||
| Machine weight | ton | 61 | ||
| Machine dimension(LxWxH) | mxmxm | 11.53×3.74×3.81 | ||
BL1850DK/Z19300
| International Specification | Z19300 | BL1850DK/Z19300 | ||
| Screw diameter | mm | 120 | 135 | 145 |
| Screw aspect ratio | 23 | 23 | 23 | |
| Theoretical injection volume | cm3 | 8200 | 10378 | 11972 |
| Shot volume (PS) | g | 7544 | 9547 | 11014 |
| oz | 266 | 337 | 388 | |
| Injection speed | mm/s | 100 | ||
| Injection rate | cm^3/s | 1170 | 1481 | 1708 |
| g/s | 1076 | 1362 | 1572 | |
| Injection pressure | MPa | 236 | 186 | 161 |
| Screw speed | r/min | 100 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 1888 | ||
| Clamping force | kN | 18500 | ||
| Platen Dimension(hxv) | mmxmm | 2500×2160 | ||
| Distance between tie bars(hxv) | mmxmm | 1860×1520 | ||
| Opening stroke | mm | 2580/1700 | ||
| Min. mould height | mm | 720 | ||
| Max. mould height | mm | 1600 | ||
| Max. Daylight | mm | 3300 | ||
| Ejector stroke | mm | 400 | ||
| Ejector force forward | kN | 309 | ||
| Ejector force back | kN | 210 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 75 | 96 | 115 |
| Pump Motor | kW | 50+50+42+50 | ||
| System Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 35000 | ||
| Machine weight | ton | 82 | ||
| Machine dimension(LxWxH) | mxmxm | 13.25×4.26×4.11 | ||
BL2100DK/Z19300
| International Specification | Z19300 | BL2100DK/Z19300 | ||
| Screw diameter | mm | 120 | 135 | 145 |
| Screw aspect ratio | 23 | 23 | 23 | |
| Theoretical injection volume | cm3 | 8200 | 10378 | 11972 |
| Shot volume (PS) | g | 7544 | 9547 | 11014 |
| oz | 266 | 337 | 388 | |
| Injection speed | mm/s | 100 | ||
| Injection rate | cm^3/s | 1170 | 1481 | 1708 |
| g/s | 1076 | 1362 | 1572 | |
| Injection pressure | MPa | 236 | 186 | 161 |
| Screw speed | r/min | 100 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 2143 | ||
| Clamping force | kN | 21000 | ||
| Platen Dimension(hxv) | mmxmm | 2500×2160 | ||
| Distance between tie bars(hxv) | mmxmm | 1850×1510 | ||
| Opening stroke | mm | 2580/1700 | ||
| Min. mould height | mm | 720 | ||
| Max. mould height | mm | 1600 | ||
| Max. Daylight | mm | 3300 | ||
| Ejector stroke | mm | 450 | ||
| Ejector force forward | kN | 496 | ||
| Ejector force back | kN | 396 | ||
| Number of ejector ping | PC | 25 | ||
| Driving and Heating | ||||
| Heater Power | kW | 75 | 96 | 115 |
| Pump Motor | kW | 50+50+42+50 | ||
| Syetem Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 42000 | ||
| Machine weight | ton | 83 | ||
| Machine dimension(LxWxH) | mxmxm | 13.25×4.26×4.11 | ||
BL2500DK/Z25800
| International Specification | Z25800 | BL2500DK/Z25800 | ||
| Screw diameter | mm | 140 | 150 | 160 |
| Screw aspect ratio | 23 | 23 | 23 | |
| Theoretical injection volume | cm3 | 12084 | 13872 | 15783 |
| Shot volume (PS) | g | 11117 | 12762 | 14521 |
| oz | 392 | 450 | 512 | |
| Injection speed | mm/s | 90 | ||
| Injection rate | cm^3/s | 1361 | 1562 | 1778 |
| g/s | 1252 | 1437 | 1636 | |
| Injection pressure | MPa | 213 | 186 | 164 |
| Screw speed | r/min | 84 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 2551 | ||
| Clamping force | kN | 25000 | ||
| Platen Dimension(hxv) | mmxmm | 2760×2460 | ||
| Distance between tie bars(hxv) | mmxmm | 2020×1720 | ||
| Opening stroke | mm | 2720/1800 | ||
| Min. mould height | mm | 780 | ||
| Max. mould height | mm | 1700 | ||
| Max. Daylight | mm | 3500 | ||
| Ejector stroke | mm | 450 | ||
| Ejector force forward | kN | 465 | ||
| Ejector force back | kN | 310 | ||
| Number of ejector ping | PC | 29 | ||
| Driving and Heating | ||||
| Heater Power | kW | 109 | 123 | 128 |
| Pump Motor | kW | 50+50+50+50 | ||
| System Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2700 | ||
| Maximum mould weight | kg | 50000 | ||
| Machine weight | ton | 123 | ||
| Machine dimension(LxWxH) | mxmxm | 14.57×4.46×4.20 | ||
BL2800DK/Z36800
| International Specification | Z36800 | BL2800DK/Z36800 | ||
| Screw diameter | mm | 160 | 170 | 185 |
| Screw aspect ratio | 23 | 23 | 23 | |
| Theoretical injection volume | cm3 | 18598 | 20996 | 24864 |
| Shot volume (PS) | g | 17110 | 19316 | 22875 |
| oz | 603 | 681 | 807 | |
| Injection speed | mm/s | 85 | ||
| Injection rate | cm^3/s | 1855 | 2094 | 2480 |
| g/s | 1707 | 1927 | 2282 | |
| Injection pressure | MPa | 198 | 175 | 148 |
| Screw speed | r/min | 69 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 2857 | ||
| Clamping force | kN | 28000 | ||
| Platen Dimension(hxv) | mmxmm | 2850×2500 | ||
| Distance between tie bars(hxv) | mmxmm | 2170×1720 | ||
| Opening stroke | mm | 2920/1900 | ||
| Min. mould height | mm | 780 | ||
| Max. mould height | mm | 1800 | ||
| Max. Daylight | mm | 3700 | ||
| Ejector stroke | mm | 500 | ||
| Ejector force forward | kN | 465 | ||
| Ejector force back | kN | 310 | ||
| Number of ejector ping | PC | 29 | ||
| Driving and Heating | ||||
| Heater Power | kW | 128 | 158 | 173 |
| Pump Motor | kW | 50+50+50+50+50 | ||
| System Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 68000 | ||
| Machine weight | ton | 143 | ||
| Machine dimension(LxWxH) | mxmxm | 16.15×4.77×4.41 | ||
BL3200DK/Z36800
| International Specification | Z36800 | BL3200DK/Z36800 | ||
| Screw diameter | mm | 160 | 170 | 185 |
| Screw aspect ratio | 23 | 23 | 23 | |
| Theoretical injection volume | cm3 | 18598 | 20996 | 24864 |
| Shot volume (PS) | g | 17110 | 19316 | 22875 |
| oz | 603 | 681 | 807 | |
| Injection speed | mm/s | 85 | ||
| Injection rate | cm^3/s | 1855 | 2094 | 2480 |
| g/s | 1707 | 1927 | 2282 | |
| Injection pressure | MPa | 198 | 175 | 148 |
| Screw speed | r/min | 69 | ||
| Clamping Unit | ||||
| Clamping force | Ton | 3265 | ||
| Clamping force | kN | 32000 | ||
| Platen Dimension(hxv) | mmxmm | 2850×2650 | ||
| Distance between tie bars(hxv) | mmxmm | 2010×1810 | ||
| Opening stroke | mm | 3020/2000 | ||
| Min. mould height | mm | 880 | ||
| Max. mould height | mm | 1900 | ||
| Max. Daylight | mm | 3900 | ||
| Ejector stroke | mm | 500 | ||
| Ejector force forward | kN | 465 | ||
| Ejector force back | kN | 310 | ||
| Number of ejector ping | PC | 29 | ||
| Driving and Heating | ||||
| Heater Power | kW | 128 | 158 | 173 |
| Pump Motor | kW | 50+50+50+50+50 | ||
| System Pressure | MPa | 17.5 | ||
| Other | ||||
| Oil tank capacity | L | 2100 | ||
| Maximum mould weight | kg | 72000 | ||
| Machine weight | ton | 155 | ||
| Machine dimension(LxWxH) | mxmxm | 16.53×4.98×4.49 | ||