Bole EKH Pet Series
| DESCRIPTION | UNIT | BL200EKH/C980 PET |
|---|---|---|
| International Specification | 980 | |
| Screw Specification | Screw specification | Customized for PET |
| Screw diameter | mm | 50 |
| Screw ratio | 25 | |
| Theroretical injection capacity | cm3 | 530 |
| Shot weight (PS) | g | 609 |
| oz | 21.5 | |
| Max. injection rate into Air | cm3/s | 247 |
| Max. injection rate into Air | g/s | 225 |
| Injection pressure | Mpa | 186 |
| g/S (PET) | 35 | |
| Injection stroke | mm | 270 |
| Max. injection speed | mm/s | 126 |
| Max. screw speed | r/min | 221 |
| Sys. Pressure | Mpa | 17.5 |
| Pump motor (min~max) | kW | 20.5~27.8 |
| Number of Motors | pc | I |
| Heater power | kW | 15 |
| Number of temp. control zons | 3+1 | |
| Clamping force | kN | 2000 |
| opening stroke | mm | 480 |
| Space between tie bar | mm x mm | 505X455 |
| Min. mould height | mm | 200 (165) |
| Max. mould height | mm | 500 (530) |
| Max Daylight | mm | 1010 (1010) |
| Ejector stroke | mm | 150 |
| Ejector force forward | kN | 67 |
| Ejector force back | kN | 39 |
| Number of ejector bar | PC | 5 |
| cycle time | s | 2.5 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 25 |
| Oil tank capacity | L | 230 |
| Machine dimensions (LxWxH) | m x m x m | 5.1×1.4×2.2 |
| Machine weight | ton | 5.5 |
| DESCRIPTION | UNIT | BL250EKH/1600 PET |
|---|---|---|
| International Specification | 1600 | |
| Screw Specification | Screw specification | Customized for PET |
| Screw diameter | mm | 60 |
| Screw ratio | 25 | |
| Theroretical injection capacity | cm3 | 890 |
| Shot weight (PS) | g | 1033 |
| oz | 36.5 | |
| Max. injection rate into Air | cm3/s | 317 |
| Max. injection rate into Air | g/s | 289 |
| Injection pressure | Mpa | 184 |
| g/S (PET) | 55 | |
| Injection stroke | mm | 315 |
| Max. injection speed | mm/s | 112 |
| Max. screw speed | r/min | 187 |
| Sys. Pressure | Mpa | 17.5 |
| Pump motor (min~max) | kW | 26.7~36.5 |
| Number of Motors | pc | I |
| Heater power | kW | 22.75 |
| Number of temp. control zons | 4+1 | |
| Clamping force | kN | 2500 |
| opening stroke | mm | 530 |
| Space between tie bar | mm x mm | 555X505 |
| Min. mould height | mm | 220 (175) |
| Max. mould height | mm | 570 (570) |
| Max Daylight | mm | 1100 (1100) |
| Ejector stroke | mm | 150 |
| Ejector force forward | kN | 123 |
| Ejector force back | kN | 82 |
| Number of ejector bar | PC | 9 |
| cycle time | s | 3.3 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 50 |
| Oil tank capacity | L | 280 |
| Machine dimensions (LxWxH) | m x m x m | 6×1.5×2.4 |
| Machine weight | ton | 6.6 |
| DESCRIPTION | UNIT | BL300EKH/C2300 PET |
|---|---|---|
| International Specification | 2300 | |
| Screw Specification | Screw specification | Customized for PET |
| Screw diameter | mm | 70 |
| Screw ratio | 25 | |
| Theroretical injection capacity | cm3 | 1385 |
| Shot weight (PS) | g | 1606 |
| oz | 56.8 | |
| Max. injection rate into Air | cm3/s | 425 |
| Max. injection rate into Air | g/s | 387 |
| Injection pressure | Mpa | 171 |
| g/S (PET) | 70 | |
| Injection stroke | mm | 360 |
| Max. injection speed | mm/s | 111 |
| Max. screw speed | r/min | 162 |
| Sys. Pressure | Mpa | 17.5 |
| Pump motor (min~max) | kW | 39.7~40.9 |
| Number of Motors | pc | I |
| Heater power | kW | 24.05 |
| Number of temp. control zons | 4+1 | |
| Clamping force | kN | 3000 |
| opening stroke | mm | 290 |
| Space between tie bar | mm x mm | 655X605 |
| Min. mould height | mm | 250 (205) |
| Max. mould height | mm | 660 (660) |
| Max Daylight | mm | 1250 (1250) |
| Ejector stroke | mm | 190 |
| Ejector force forward | kN | 123 |
| Ejector force back | kN | 82 |
| Number of ejector bar | PC | 13 |
| cycle time | s | 2.8 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 50 |
| Oil tank capacity | L | 350 |
| Machine dimensions (LxWxH) | m x m x m | 6.4×1.7×2.4 |
| Machine weight | ton | 8.5 |
| DESCRIPTION | UNIT | BL400EKH/C3100 PET |
|---|---|---|
| International Specification | 3100 | |
| Screw Specification | Screw specification | Customized for PET |
| Screw diameter | mm | 80 |
| Screw ratio | 25 | |
| Theroretical injection capacity | cm3 | 1909 |
| Shot weight (PS) | g | 2215 |
| oz | 78.3 | |
| Max. injection rate into Air | cm3/s | 561 |
| Max. injection rate into Air | g/s | 511 |
| Injection pressure | Mpa | 162 |
| g/S (PET) | 90 | |
| Injection stroke | mm | 380 |
| Max. injection speed | mm/s | 112 |
| Max. screw speed | r/min | 131 |
| Sys. Pressure | Mpa | 17.5 |
| Pump motor (min~max) | kW | 50.7~52.7 |
| Number of Motors | pc | I |
| Heater power | kW | 27.35 |
| Number of temp. control zons | 4+1 | |
| Clamping force | kN | 4000 |
| opening stroke | mm | 660 |
| Space between tie bar | mm x mm | 710X660 |
| Min. mould height | mm | 270 (225) |
| Max. mould height | mm | 710 (710) |
| Max Daylight | mm | 1370 (1370 |
| Ejector stroke | mm | 190 |
| Ejector force forward | kN | 166 |
| Ejector force back | kN | 117 |
| Number of ejector bar | PC | 13 |
| cycle time | s | 3.6 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 50 |
| Oil tank capacity | L | 420 |
| Machine dimensions (LxWxH) | m x m x m | 7.4X1.8X2.4 |
| Machine weight | ton | 13.5 |
| DESCRIPTION | UNIT | BL450EKH/C4000 PET |
|---|---|---|
| International Specification | 4000 | |
| Screw Specification | Screw specification | Customized for PET |
| Screw diameter | mm | 85 |
| Screw ratio | 25 | |
| Theroretical injection capacity | cm3 | 2496 |
| Shot weight (PS) | g | 2895 |
| oz | 102.3 | |
| Max. injection rate into Air | cm3/s | 672 |
| Max. injection rate into Air | g/s | 611 |
| Injection pressure | Mpa | 163 |
| g/S (PET) | 110 | |
| Injection stroke | mm | 440 |
| Max. injection speed | mm/s | 118 |
| Max. screw speed | r/min | 131 |
| Sys. Pressure | Mpa | 17.5 |
| Pump motor (min~max) | kW | 57.3~62.7 |
| Number of Motors | pc | 2 |
| Heater power | kW | 32 |
| Number of temp. control zons | 4+1 | |
| Clamping force | kN | 4500 |
| opening stroke | mm | 750 |
| Space between tie bar | mm x mm | 760X710 |
| Min. mould height | mm | 330 |
| Max. mould height | mm | 780 |
| Max Daylight | mm | 1530 |
| Ejector stroke | mm | 210 |
| Ejector force forward | kN | 166 |
| Ejector force back | kN | 117 |
| Number of ejector bar | PC | 13 |
| cycle time | s | 3.7 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 50 |
| Oil tank capacity | L | 420 |
| Machine dimensions (LxWxH) | m x m x m | 8×1.77×2.3 |
| Machine weight | ton | 14.5 |
| DESCRIPTION | UNIT | BL530EKH/C4700 PET |
| International Specification | 4700 | |
| Screw Specification | Screw specification | Customized for PET |
| Screw diameter | mm | 95 |
| Screw ratio | 25 | |
| Theroretical injection capacity | cm3 | 3224 |
| Shot weight (PS) | g | 3739 |
| oz | 132.1 | |
| Max. injection rate into Air | cm3/s | 873 |
| Max. injection rate into Air | g/s | 794 |
| Injection pressure | Mpa | 146 |
| g/S (PET) | 140 | |
| Injection stroke | mm | 455 |
| Max. injection speed | mm/s | 123 |
| Max. screw speed | r/min | 131 |
| Sys. Pressure | Mpa | 17.5 |
| Pump motor (min~max) | kW | 67.1~75.7 |
| Number of Motors | pc | 2 |
| Heater power | kW | 36.1 |
| Number of temp. control zons | 4+1 | |
| Clamping force | kN | 5300 |
| opening stroke | mm | 850 |
| Space between tie bar | mm x mm | 860X800 |
| Min. mould height | mm | 330 |
| Max. mould height | mm | 850 |
| Max Daylight | mm | 1700 |
| Ejector stroke | mm | 210 |
| Ejector force forward | kN | 166 |
| Ejector force back | kN | 117 |
| Number of ejector bar | PC | 13 |
| cycle time | s | 4.3 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 100 |
| Oil tank capacity | L | 600 |
| Machine dimensions (LxWxH) | m x m x m | 8.8x2x2.5 |
| Machine weight | ton | 19.5 |
| DESCRIPTION | UNIT | BL600EKH/C5800 PET |
| International Specification | 5800 | |
| Screw Specification | Screw specification | Customized for PET |
| Screw diameter | mm | 100 |
| Screw ratio | 25 | |
| Theroretical injection capacity | cm3 | 3925 |
| Shot weight (PS) | g | 4553 |
| oz | 160.9 | |
| Max. injection rate into Air | cm3/s | 980 |
| Max. injection rate into Air | g/s | 892 |
| Injection pressure | Mpa | 149 |
| g/S (PET) | 150 | |
| Injection stroke | mm | 500 |
| Max. injection speed | mm/s | 125 |
| Max. screw speed | r/min | 135 |
| Sys. Pressure | Mpa | 17.5 |
| Pump motor (min~max) | kW | 77.4~89.2 |
| Number of Motors | pc | 2 |
| Heater power | kW | 43 |
| Number of temp. control zons | 5+1 | |
| Clamping force | kN | 6000 |
| opening stroke | mm | 900 |
| Space between tie bar | mm x mm | 910X855 |
| Min. mould height | mm | 380 |
| Max. mould height | mm | 910 |
| Max Daylight | mm | 1810 |
| Ejector stroke | mm | 220 |
| Ejector force forward | kN | 166 |
| Ejector force back | kN | 117 |
| Number of ejector bar | PC | 21 |
| cycle time | s | 4.4 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 100 |
| Oil tank capacity | L | 750 |
| Machine dimensions (LxWxH) | m x m x m | 9×2.2×2.75 |
| Machine weight | ton | 22 |