EKH-UPVC SERIES
Technical Data
| DESCRIPTION | UNIT | BL1400EKH/C13000/UPVC |
| International specification | 13000 | |
| Screw diameter | Screw specification |
customized for PVC |
| mm | 130 | |
| Screw ratio | 21.0 | |
| Theoretical injectionncapacity | cm‘ | 8491 |
| Shot weight (UPVC) | g | 10189 |
| OZ | 360 | |
| Injection rate into Air | cm’/s | 1420 |
| g/S | 1704 | |
| Injection pressure | MPa | 154 |
| Theoretical plasticization rate | g/S (UPVC) | 144 |
| Injection stroke | mm | 640 |
| Max. in jection speed | mm/s | 107 |
| Screw speed | r/min | 65 |
| Sys. Pressure | MPa | 17.5 |
| Pump Motor ( M in ~ M ax) | kW | 119.1~122.7 |
| Number of Motors | PC | 3 |
| Heater power | kW | 74.6 |
| Number of temp. control zones | 6+1 | |
| Clamping force | kN | 14000 |
| Opening stroke | mm | 1450 |
| Space between tie bar | mm x mm | 1420×1220 |
| Min. mould height | mm | 580 |
| Max. mould height | mm | 1300 |
| Max. distance Platen | mm | 2750 |
| Ejector stroke | mm | 350 |
| Ejector force forward | kN | 248 |
| Ejector force back | kN | 165 |
| Number of ejector bar | PC | 29 |
| Cycle time | S | 8.5 |
| Energy | kW.h/kg | ≤0.5 |
| Hopper capacity | kg | 200 |
| Oil tank capacity | L | 1650 |
| Machine dimensions (L X W X H) | mxmxm | 12.3×3.3×4.1 |
| Machine weight | Ton | 67 |
| Widen safety gate Optionally (single side) | mm | 250 |
| Machine dimensions (LXWX H) | m x m x m | 1 2.3×3.8×4.1 |