PET SERIES
Technical Data
| DESCRIPTION | UNIT | Z650/780PET | ||
| INJECTION UNIT | ||||
| Screw diameter | mm | 110 | ||
| Screw L/D ratio | L/D | 25 | ||
| Shot volume(theoretical) | cm3 | 4464 | ||
| Injection weiht(PET@1.3) | g | 5804 | ||
| Injection speed | mm/s | 101 | ||
| Injection rate | g/s | 1144 | ||
| Injection pressure | Mpa | 131 | ||
| Screw speed | rpm | 102 | ||
| Shooting force (Double shooting) | KN | 141 | ||
| CLAMPING UNIT | ||||
| Clamping force | kN | 6500 | ||
| Open stroke | mm | 870 | ||
| Space between tie bars(W×H) | mm | 880*880 | ||
| Max.Mould height | mm | 900 | ||
| Min.Mould height | mm | 350 | ||
| Ejector stroke | mm | 250 | ||
| Ejector force | kN | 150 | ||
| OTHERS | ||||
| Max.Pump pressure | S | 16 | ||
| Pump motor power | kW | 92 | ||
| Heating power | kW | 71.0 | ||
| Machine dimension(L×W×H) | m | 10.7*2.24*2.71 | ||
| Oiltank cubage | L | 1100 | ||
| Machine weight | t | 29 | ||